Aft
Port Locker
O.K., it looks a little
anal, but it was my first stab at organization in the cockpit...
-
- I put a white
plastic frame around some 1/8 inch Louan and screwed that right
through the seat top with four screws (they are flush on the
topside). The frame (some plastic "U" channel) raised
the wood away from the seat so I could use nuts on the back of
the wood panel. With the Louan mounted away from the surface,
I could bolt anything to the wood and rearrange it as necessary.
-
- There are four
dock line hangers, a tiller extension, and a spare main boom
furling handle.
-
- Down in the
bottom of the locker, I epoxied some divders out of the same
Louan for spare gas tank, throw line, bungees, etc.
-
- I also epoxied
four 4 inch sections of 3 inch PVC pipe together like this:
and just set the whole thing in the floor
of the locker. It is perfect for holding cans of butane for the
stove and propane for the grill.
-
BACK
TO MAIN PAGE